Contact Us

    9041 6443

    324 High Street, Preston

    Business Hours

    Mon - Thu: 10:00 AM - 5:00 PM
    By appointment only

    Friday: 10:00 AM - 2:00 PM
    By appointment only

    Saturday: Open by appointment only

    Sunday: Closed

    MADE IN OUR OWN PRESTON LAB

    Digital Dentures in Preston,Milled or 3D-Printed in Our Own Lab

    Designed on screen, then made in our Preston lab by the dental prosthetist you see.

    Made on site in Preston Same prosthetist throughout Health fund rebates
    ABOUT THIS DENTURE SERVICE

    Digital dentures are designed on a computer from an accurate model of your mouth, then made by machine. At Preston Dentures we make them two ways: milled from a solid block of acrylic, or 3D-printed from dental resin. Both are made in our on-site lab at 324 High Street, Preston, by the same dental prosthetist you consult with. We see patients from Preston, Reservoir, Thornbury, Northcote, Coburg and across Melbourne's northern suburbs.

    What are digital dentures?

    Digital dentures are removable dentures that are designed on screen and made by a milling machine or a 3D printer, instead of being packed and set by hand. You still get a full or partial denture that you take out to clean, but its shape and bite are checked on screen before anything is made.

    A traditional denture is shaped in wax and then processed in liquid acrylic. A digital denture starts as a design file, which we use to check how your teeth will look and keep on file afterwards.

    Intraoral digital scanning of teeth and gums for digital denture design at Preston Dentures
    PRICE PER ARCH

    $2,150 – $3,980

    Written quote after your free consultation.

    TWO WAYS TO MAKE A DIGITAL DENTURE

    Should I choose milled or 3D-printed dentures?

    Choose a milled denture if you want the densest, strongest base, and a 3D-printed denture if you want a digitally designed denture at a lower price. Both start from the same scan and design, and we'll recommend one after examining your mouth at your free consultation.

    Milled dentures

    A milled denture is cut from a solid block of acrylic that has already been fully cured under high heat and pressure, as described in a 2025 systematic review of CAD-CAM denture bases. Because the acrylic is cured before it reaches the milling machine, it doesn't set or shrink while your denture is being made.

    People who want the strongest, densest base

    3D-printed dentures

    A 3D-printed denture is built up layer by layer from dental resin. It's quicker to produce, and because your design is saved, a replacement can be reprinted.

    People who want a digital denture at a lower price

    In laboratory testing, milled denture bases showed higher flexural strength than 3D-printed ones. Those are bench tests, not years in someone's mouth, so we treat them as one factor alongside your bite, your gums and what you'd like to spend.

     Milled3D-printed
    How it's madeCut from a solid block of pre-cured acrylicBuilt up layer by layer from dental resin
    Strength in lab testsHigherLower than milled
    TurnaroundStandardUsually quicker
    Design file kept for replacementsYesYes
    Price per arch$3,250–$3,980$2,150–$2,950
    SuitsPeople who want the strongest, densest basePeople who want a digital denture at a lower price
    From the lab

    The person you consult with is the person who makes your denture. Dragan takes your scan and records, designs your denture on screen and checks the try-in with you, and the denture is then milled or printed in our lab in the same building.

    That's why the try-in matters so much here. If the fit, the bite or the look of your teeth isn't right, it's changed in the design before your denture is made, not fixed afterwards.

    WHO IT'S FOR

    Who are digital dentures a good fit for?

    Digital dentures suit most people who need a new full or partial denture, especially if their current denture doesn't fit or look the way they want. They're also a good fit if you'd like a stored design file so a spare or replacement is easier to make later.

    They're worth asking about if you:

    Wear a denture now and are unhappy with how it fits or looks

    Find impression trays uncomfortable or gag easily

    Want to compare digital and traditional dentures before deciding

    Want a spare set made from the same design

    Are helping a parent work out their options

    CLINICAL WORKFLOW

    How are digital dentures made?

    Your digital denture is made in five steps: a consultation, a scan of your mouth, a design on screen with a try-in, milling or 3D printing in our lab, and a final fitting. You see the same dental prosthetist at every step, because the person you consult with is the person who makes your denture.

    01

    Consultation

    We examine your mouth, talk through milled and 3D-printed options, and give you a written quote.

    02

    Scan and records

    We take a digital scan of your mouth, alongside conventional impressions where your case needs them.

    03

    Design and try-in

    We design your denture on screen, then you try in a sample so we can check the fit, your bite and how your teeth look.

    04

    Milling or printing

    Your denture is milled or printed from the approved design in our Preston lab.

    05

    Fitting

    We fit your denture, adjust it so it sits comfortably, and show you how to look after it.

    IMPRESSIONS

    Do digital dentures still need impressions?

    Often, yes, at least in part. We use a digital scan alongside conventional impressions, because combining the two gives us the most accurate model of each patient's mouth.

    If you gag on impression trays, tell us when you book. We'll explain which records your case needs and how we'll keep that part of the appointment as short as we can.

    VS TRADITIONAL

    Are digital dentures better than traditional dentures?

    Digital dentures avoid one known weakness of traditional dentures: conventional acrylic shrinks slightly as it sets. A milled denture is cut from acrylic that is already fully cured, so that shrinkage doesn't happen during processing.

    The same systematic review of denture base materials notes that polymerisation shrinkage in conventional acrylic dentures is well documented. A digital denture also comes with a saved design, so it can be remade without starting again.

    That doesn't make digital the right choice for every mouth. We also make traditional full dentures, and if a conventional denture suits you better, we'll tell you.

    What are the downsides of digital dentures?

    Digital dentures cost more than a standard denture, and a milled denture costs more than a 3D-printed one. They also still take several appointments, because the try-in and fitting steps can't be skipped.

    Not every case suits a digital workflow. We'll assess yours at your consultation and explain the trade-offs before you decide.

    Can a digital denture be replaced if it's lost or broken?

    Yes. We keep your digital design file, so a replacement or spare set can be made from it without starting again from new impressions.

    If it's been a while since your denture was made, we'll check your mouth first. Gums and the jaw underneath them change shape over time, which we explain in how jawbone changes affect denture fit.

    How much do digital dentures cost?

    At Preston Dentures, a 3D-printed digital denture is $2,150–$2,950 per arch and a milled digital denture is $3,250–$3,980 per arch. Your exact written quote comes after an exam at your free first consultation.

    An upper and lower set is two arches. You'll find every option side by side on our denture pricing page.

    Are digital dentures covered by private health insurance?

    If your extras cover includes dentures, you can claim part of the cost, and we process claims on the spot with HICAPS. How much you get back depends on your fund and your level of cover.

    We give you itemised receipts with the standard Australian Dental Association item codes, so you can check your rebate with your fund before you start. We accept Bupa, Medibank, HCF, HBF, NIB, Australian Unity and DVA.

    How long do digital dentures last?

    How long any denture lasts depends on how your gums and jaw change over time and how the denture is cared for. We'll give you a realistic timeframe for your mouth at your consultation, and we'll tell you when a reline or a remake makes more sense.

    Regular check-ups help. Clean your denture daily with a soft brush and a non-abrasive cleaner, and keep it away from hot or boiling water, which can warp it.

    Why have your digital dentures made at Preston Dentures?

    Because the dental prosthetist you consult with is the one who designs and makes your denture, in our on-site lab at 324 High Street, Preston. Dragan Flajnik, Dental Prosthetist, has over 20 years of experience making dentures.

    Dental prosthetists are registered practitioners whose work, under the Dental Board of Australia's scope of practice guidelines, focuses on removable dentures, including implant-retained dentures. If you'd like a digital denture that clips onto implants, see implant-retained dentures. We make the denture, and partner implant surgeons place the implants.

    We're on High Street, Preston, on the Route 86 tram line, with step-free access and parking on site and in nearby streets.

    ONLINE BOOKING

    Book your free digital denture consultation

    Your free first consultation includes an examination, a talk through milled and 3D-printed options, and a written quote, with no obligation to go ahead. You'll meet the person who will make your denture.

    324 High Street, Preston VIC 3072
    Mon–Thu 10am–5pm · Fri 10am–2pm · Sat by appointment · All visits by appointment
    ONLINE APPOINTMENTS

    Select a Date

    November 2026

    Su
    Mo
    Tu
    We
    Th
    Fr
    Sa

    324 High Street, Preston VIC 3072 · Mon–Thu 10am–5pm · Fri 10am–2pm · Sat by appointment · All visits by appointment

    EXPLORE OPTIONS

    Other Denture Services

    View all services

    Flexible Partial Dentures (Valplast)

    Valplast flexible partial dentures offer exceptional comfort and aesthetics without metallic clasps. Made from durable thermoplastic nylon, they blend naturally with your gums.

    Learn more

    Standard Dentures (Full Dentures)

    High-quality, durable complete dentures designed to replace an entire arch of missing teeth. Handcrafted in Melbourne for a realistic smile and comfortable bite.

    Learn more

    Partial Dentures (Acrylic & Metal Chrome)

    Designed to fill gaps when some natural teeth remain. Available in strong, thin Cobalt Chrome or economical Acrylic options to stabilize your bite.

    Learn more